The 22nd Annual Fishing Derby, sponsored by Jerry’s Bait and Tackle and WMRC Radio, was held at Louisa Lake Saturday. The lake was stocked with trout on Friday and police kept the lake from being fished out before the derby started.
The chilly 30 degree weather did not deter more than 75 kids from showing up for the 7 a.m. cast off.
Richy Anketel and Kayley Esteves caught the largest trout in the boys and girls divisions, respectively, and received trophies for their effort.
Richy caught a 15-inch trout. Kayley landed a 13-inch fish.
Event details also seen here: http://www.yelp.com/events/milford-first-class-fishing-derby-louisa-lake
Available Now at Jerry’s B&T:
Thanks to the new S4Gear Smartphone Bow Mount, hunters can immediately view and share their footage filmed right from their bow. The JackKnife Smartphone Bow Mount by S4Gear is mounted off of the sight mount allowing hunters to use their phone to film their hunts from the “hunter’s eyes”. Hunters can then use footage to view shot placement before tracking an animal, as a training device to review shot form and even to incorporate split screens into final video pieces on web, TV and DVD.
Designed to be universal and highly adjustable, the JackKnife’s cradle fits virtually any smartphone and can be installed on any bow with an AMO standard sight mount—right- or left-handed. The JackKnife’s cradle utilizes a protective foam lining to hold smartphones securely in place while simultaneously guarding against shock and vibration.
Installation only requires that you attach the mounting bracket to a bow’s sight mount and adjust three knobs for preferred phone placement. The swing arm hinges adjusts or completely detaches in seconds. The compact design folds flush against the riser when not in use allowing it to fit in most bow cases.
The JackKnife will also be compatible with the S4Gear WingMan treestand console. Other accessories, such as a tubular mount used for attaching the JackKife to bicycle and ATV/UTV handlebars, as well as crossbow scopes and shooting sticks, will be available by spring 2012
Jerry shows you how to set-up a Tilt (aka: Ice trap or tip-up). how to use Spring Sounder or a Spring Clip Sounder to properly measure and set the depth of the water and set the Button to mark the depth. Jerry’s technique to have the bait sit about a foot off the bottom and/or depth of your choosing. He also shows how to properly put the Hook into a Shiner, forward (Jerry’s preference) or behind the dorsal fin. You will also learn how to set the hook and retrieve your catch up through the hole.
Well Jerry, Here he is!!! Today I shot my first deer ever with a bow. An Eight pointer!!! And you made it happen! Used my Hoyt TruboHawk and you guessed it SPITFIRE broad heads. Man they make an awesome sounding WHACK when they hit. He ran 50 yards and folded up mid jump. Can’t thank you enough for all your help and instruction over the past year. talk to you soon, Matthew Greenway.
Peter Vican of East Greenwich, RI landed this 76lb. 14oz. striped bass while fishing the 4th Annual Block Island Volunteer Firemen’s Tournament on July 19th 2008. The fish became a State of RI record.
Peters 1st Fish Story: ” Don Smith and I had been fishing different spots around the island since sundown looking for a bass over 40 pounds. We had come close to that weight but felt we needed something over 40 pounds to be in contention for the winning fish.Then on June 16, 2011 Peter caught an even bigger striped bass. This one weighed 77.4 pounds.
We moved to one of our tried and true spots that we nicknamed the “Nest”. We made three or four drifts over the Nest with mixed results. If we drifted towards the inside of our mark we didn’t get any hits at all. If the drift were to the outside of the mark one of us would get a hit. By 1 AM the water was as flat as glass, the drift was just about nonexistent and the bite fell off. I had an eel on my rig that was almost dead from being taken by three bass on previous drifts. I put my rod in the rod holder and picked up a bottle of water from the cooler for a drink. All of a sudden the rod bent over and line started screaming off the spool at an alarming rate.
It took some effort for me to get the rod out of the holder and I held the rod tightly while the fish stripped off line. We fish with rods rated for 12 to 25 lb. line, and I use a Penn 560 Slammer spinning reel. By the time the fish stopped her run my reel was almost empty of line. For every ten yards of line that I reeled in the fish took back five with very little effort.
I was surprised how easy the fish slid into the net. Don rested the handle against the side of the boat, holding it with one hand while he grabbed the rim of the net with the other so he could lift the fish into the boat. He couldn’t lift the fish because the rim of the net started bending and had to use both of his hands on the rim to keep it from bending under the weight of the fish. As he struggled to lift the fish into the boat I grabbed the handle of the net and helped to lift the fish out of the water. As Don swung the fish onto the deck he said to me that the fish had to go at least 60 pounds. I looked at it and said it was probably closer to 50. Don noted that the fish was as big around as my waist and I quickly replied “Maybe yours but not mine. I’m a lot thicker than the fish is.” My observation turned out to be correct, the fish’s girth measured in at 34 inches. Don glanced down at his watch and said the entire fight had lasted just over 30 minutes.
The fish was too big to fit in the fish well so we wrapped it with wet towels. We weighed it in at 7 AM the next morning at Twin Maples Bait Shop on Block Island. The fished weighed 76 pounds 14 ounces; measured 54 ¾” long and had a 34″ girth. It was a new Rhode Island state record and the second largest striper caught on rod and reel according to IGFA records.”
Jerry’s Bait & Tackle is a premier Archery Pro Shop and Archery range located in Milford, MA. We are a complete compound bow service company prepared to fine tune, tweak, and repair just about any bow. Our staff has over 30 years in bow repair and fine tuning services and our team is confident we can take on just about any problem and provide you with a solution.
Jerry’s Bait & Tackle offers the following services to keep you on the “Straight ‘N’ Arrow“.
Compound Bow Repair
(frays, strains, lose items)
Accessory Installation
(grips, peeps, kissers, sights, and more)
Are you a Bait & Tackle Shop Owner? Or, are you a Fishing enthusiast and have thought; “I wonder where my favorite bait and tackle shop gets their bait?”
Well. . . wonder no more. My name is Jerry, owner of Jerry’s Bait and Tackle in Milford, MA. We have proudly served the MetroWest since 1982 with the Best, always fresh and lively bait from Tom’s Wholesale Bait Company. Over the past 30 years, Tom has provided impeachable service, never missing our scheduled delivery and always has the freshest and lively bait to tempt the BIG one – even on a slow day!
Whether you are fishing your favorite Freshwater spot in the MetroWest, headed down to Cape Cod to test your Saltwater skills on the Canal or, out on the open water – we have the right bait for what you are fishing for. From Meal worms to Eels, you can always depend on Jerry’s Bait & Tackle and Tom’s Wholesale Bait Company to make every fishing trip a memorable one.
One of the most popular fishing spots on the East Coast is the Cape Cod Canal. Striped bass, especially, in season attract anglers from far and wide. A large part of the attraction involves ease of access. Ample free parking exists all along the waterway, and the banks are a short walk from one’s vehicle. This reduces fishing to the basics – a pole and a few lures.
Look for first keeper stripers mid-May, but local populations are augmented throughout the season that ends with a rush of passing migrants in late October. Bluefish — always targets of opportunity for stripermen — show up in July. Unlike waters west and south, summer fishing holds up on the Canal offering stripers and blues at something between a steady pick and blitz when they are hard to find elsewhere. Time proven, the Cape Cod Canal is a classic striper ground because it is reliable throughout the season.
If you are travelling from the North and/or West, you can stop by Jerry’s Bait & Tackle in Milford, MA that is easily accessible from Route 495. Jerry stocks a wide variety Saltwater Rods, Reels, Tackle and Lures. You can also pick-up some of the “liveliest” Eels, which are can’t pass it up candy to Striped Bass late season (September – October) on the Cape and especially in the Cape Cod Canal.
Jerry’s Bait & Tackle is easily accessible from the following communities:
Auburn, MA | Berlin, MA | Blackstone, MA | Boylston, MA | Clinton, MA | Douglas, MA | Grafton, MA | Linwood, MA | Manchaug, MA | Millbury, MA | Millville, MA | Northborough, MA | Northbridge, MA | North Grafton, MA | North Oxford, MA | North Uxbridge, MA | Oxford, MA | Rochdale, MA | Shrewsbury, MA | South Grafton, MA | Upton, MA | Uxbridge, MA | Webster, MA | Westborough, MA | West Boylston, MA | West Millbury, MA | Whitinsville, MA | Sutton, MA | Worcester, MA | Cherry Valley, MA | Framingham, MA | Ashland, MA | Fayville, MA | Holliston, MA | Hopedale, MA | Hopkinton, MA | Hudson, MA | Marlborough, MA | Maynard, MA | Mendon, MA | Milford, MA | Natick, MA | Sherborn, MA | Southborough, MA | Stow, MA | Sudbury, MA | Wayland, MA | Woodville, MA | Bellingham, MA | Dedham, MA | Dedham, MA | Dover, MA | East Mansfield, MA | East Walpole, MA | Foxboro, MA | Franklin, MA | Mansfield, MA | Medfield, MA | Medway, MA | Millis, MA | Norfolk, MA | Norwood, MA | Sharon, MA | Sheldonville, MA | South Walpole, MA | Walpole, MA | Westwood, MA | Wrentham, MA | Babson Park, MA | Newton Highlands, MA | Newton Lower Falls, MA | Newton Upper Falls, MA | Auburndale, MA | Waban, MA | Wellesley Hills, MA | Wellesley, MA | Needham, MA | Weston, MA | Needham Heights, MA | Attleboro, MA | North Attleboro, MA | Plainville, MA | Attleboro Falls, MA | Albion, RI | Chepachet, RI | Forestdale, RI | Glendale, RI | Greenville, RI | Harmony, RI | Harrisville, RI | Manville, RI | Mapleville, RI | Oakland, RI | Pascoag, RI | Central Falls, RI | Cumberland, RI | Lincoln, RI | Slatersville, RI | Woonsocket, RI | North Smithfield, RI | Smithfield, RI
If you’re a striper fisherman and you don’t fish with eels, you’re missing out on one of the most productive methods of taking big bass. When I first started fishing with the Connecticut Surfcasters Association, the other guys I fished with were using plugs while I was using eels. Pretty soon, a lot of them turned to eel fishing due the results of those outings. Here is an overall look at striper fishing with eels from caring for your bait to fishing techniques.
The first thing that you will have to do is get the “snakes” from the tackle shop to your fishing spot. The best method I have found for transporting them is to place them in a small “six-pack” sized cooler with a reusable plastic ice block. The cooler is compact and will easily accommodate a dozen medium sized eels. The plastic ice block keeps the eels cool without melting. This is important because if the eels become immersed in water, they will deplete the oxygen in the water and suffocate. It is also a good idea to place a damp cloth in the cooler as the eels prefer a moist environment.
If you are not wading, you can carry your eels with you in the cooler, but if you’re doing any wading or a lot of walking from spot to spot, you’ll want something more convenient to carry them in. I use a mesh bag with a drawstring at the opening. Many tackle shops, as well as scuba diving supply shops, carry them. You can also fashion an eel container out of a plastic institutional sized mayonnaise jar. First, you make small drain holes in the bottom of the container to allow water and slime to drain out. Next, you make two larger holes near the opening of the jar to attach a carrying rope. You cut the rope to a length to suit you, you don’t want the jar to interfere with your casting, then stick each end of the rope through the holes from the outside and knot them on the inside. You might want to attach the lid to the container with the knotted rope method.
These pieces of “striper candy” can be difficult to handle at times. If you’ve kept them in the cooler, they will be easier to handle because the ice pack slows them down. The best way to handle eels that I have found is to cut up an old burlap bag into rags. This course material lets you get a good grip on the “snake”. If you can’t find burlap, old cotton socks will do. You grab the eel by the back of the “neck” and grip tightly. Remember, eels can’t hurt you but sometimes they will try to wrap themselves around your wrist and get you a little slimed up.
Your terminal tackle should consist of a hook, a monofilament leader and a swivel. The hook should have a short shank and have a bronze or black finish. Stay away from the nickel or gold finish hooks as they are more apt to be seen by a wary striper. Depending on the size of the eel, I use a 4/0 to 6/0 Mustad 94150 or Mustad 9174 (Gamakatsu Octopus #0241_). Some guys swear by the circle hooks but I have to admit, I haven’t tried them yet. Now that they come in a black finish, I’ll have to give them a try (Gamakatsu Octopus Circle #20841_). For leader material, 3 feet of 40 to 60 pound test monofilament is preferred. I like to use heavier leaders when fishing rocky areas due to the striper’s penchant for diving into rocks. Attach a 90/100 pound test black barrel swivel to the end of the leader and that completes your terminal tackle.
Now it’s time to start fishing. There are several methods of hooking an eel. One method is to run the point of the hook through one eye and out the other. This way you have the support of the skull when you cast your eel. Another method is to place the point of the hook into the eel’s mouth and bring it out through one of the eyes. My personal favorite method of hooking an eel is to place the point of the hook as deeply into the eel’s mouth as possible and bring it out through the bottom of the throat. The disadvantage of this is that the soft tissue tears more easily and you might loose a few more eels when casting, but not a significant number. The advantage is that the eel will stay lively longer and you can hide more of the hook shank in the eel’s mouth so as to be less noticeable to your prey.
After you cast your eel seaward, hold your rod tip in the 12:00 o’clock position and reel in slowly. When a bass strikes your eel, there are two schools of thought as to what to do next.
One way to proceed is to drop your rod tip so it’s parallel with the water and set the hook when the line tightens.
The other school of thought is to drop your rod tip like before but as you drop your rod, open your bail, or throw the clutch if you’re using conventional gear, and count to 10 while you let the fish run. You’ll want to close your bail or engage your gears, but not without slack in your line because the fish might feel the tension and drop your offering. To get that needed slack, you slowly raise your rod tip while the fish is running, then drop it again. Engage your line pick up and keep you rod tip low until the line tightens, then set the hook. This gives the fish a chance to take the bait and gives you a better chance for a hook up. Unfortunately, this often means you’ll hook the fish deeper and could do damage to a fish you intend to release.
If you wish to release a deeply hooked fish, cut the leader as close to the hook as you can as quickly as you can.
You can keep using your eel until it hangs lifeless from your hook. If there’s still a curl to its tail, keep using it. There seems to be an attraction by stripers to eels that have already been taken by other stripers. I’m not sure why this is but I do know that you can catch multiple fish on the same eel, so don’t throw out that snake after it has worked for you once. You might have to reposition your hook as the strike of the bass may have torn a hole where the hook penetrates the eel.
If you find yourself with leftover eels at the end of your trip, they are not difficult to keep alive for your next trip. The easiest way to keep your eels alive is to get a 5 or 10 gallon aquarium with an aerator. Try to keep the aquarium in a cool part of the house because if the water gets too warm, the eels won’t survive. I keep the eels in the mesh bag and dunk the whole thing in the aquarium. This saves me the trouble of having to scoop net them. If you don’t keep them in a mesh bag, put some sort of covering over the aquarium as the eels can escape.
Another way to keep your eels alive is to use what I call the “three bucket system”. This consists of three 5 gallon buckets, two of which have drain holes in the bottom, damp seaweed or rags, and ice. You place the eels with the damp seaweed or rags in a bucket with drain holes and place that bucket inside the bucket without drain holes. Then, you place the second bucket with drain holes over the bucket with the eels and place ice cubes in it. This set up allows the ice to melt and drip onto the eels to keep them moist and it lets any excess water and slime to drain off of the eels and into the bottom bucket. They will stay alive and healthy as long as you keep them moist. This method is a little more labor intensive because you’ll have to add ice and drain the bottom bucket a couple of times a day.
I hope this has shed some light on some of the ins and outs of fishing with live eels. It has proven to be a successful technique for me and I hope it will be as successful for you. Keep a tight line and happy fishing.
If you are headed to Cape Cod or Cape Cod Canal from the West or North of Route 495, we are conveniently located along the way to pick-up your Live Eels, frozen bait, lures or tackle.